Olympic Games
27 July - 12 Aug 2012
Paralympic Games
29 Aug - 9 Sept 2012
|
Heavy Duty Aluminium Hockey Goals
Heavy Duty Aluminium Hockey Goals
An excellent option specifically suited to both water and sand based synthetic surfaces. The goals can be easily moved using our cellular rubber wheel kit preventing damage to the surface.
All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.
Heavy Duty Aluminium Hockey Goals
• Regulation size 3.66m wide x 2.14m high with a 1.22m runback
• Manufactured from 50.8mm x 65mm x 2.5mm thick reinforced aluminium
• Uprights, crossbar and side frames all polyester powder coated white
• Zinc plated corner joints made from 8mm thick steel plate
• Back supports and top backbar manufactured from 32mm diameter x 2.6mm thick aluminium
• 460mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Side frames complete with fully welded back tubes and lifting handles for added strength
• Stainless steel bolts throughout
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
Recommended net HOC-003
190.00 kg
per set
HOC-104
HP14 Hockey Net
• 3mm thick green polyethylene net
• 3.7m x 2.1m x 1.2m
7.60 kg
per pair
HOC-003
Cellular Rubber Wheel Kit
• Cellular rubber puncture proof wheels for aluminium goals
• Supplied as a set of 4
16.00 kg
per set
HOC-141
Hockey Goal Anchor Options - Fence Anchors
• 4 required per set of goals
• Suitable for use on artificial and 3G surfaces
• For attaching to surround fence or use with ANC-020
• Complete with eyebolt, 2 x carbine clips and 3m length of chain
• Extra lengths of chain can be ordered per metre
2.20 kg
each
ANC-022
Hockey Goal Anchor Options - Flip-up Anchor Socket
• 4 required per set of goals
• Specifically designed for installation on synthetic pitch areas and tarmac
• Requires installation into a 350mm cube of concrete
• Galvanised steel construction complete with stainless steel top plate and flip-up anchorage point
• Anti-tamper lid produces a flush fit to the surface for optimum safety
• Complete with allen key to prevent unauthorised access to sand trap
• Anchorage point flips up to enable easy attachment of a carbine clip
• Socket only, use ANC-022 anchor for attachment to goal
3.20 kg
each
ANC-020
Hockey Goal Anchor Options - Counterbalance Weight
• 20 required per set of goals
• 17kg Handbag style weight complete with 3 link galvanised chain, carbine clip and ‘U’ type bracket
17.00 kg
each
ANC-005
Hockey Goal Anchor Options- Heavy Duty Turf Anchor
• 4 required per set of goals
• Suitable for use on grass surfaces
• Must be used for hockey goals on very soft ground
• Complete with 3 link galvanised chain, carbine clip and ‘U’ type bracket
14.00 kg
each
ANC-008
|
|